Panasonic WJ-NV200K User Manual (English)

Other manuals for Panasonic WJ-NV200K

Installation Guide94 pages

Quick Reference Guide4 pages

Questions and Answers:

T
Thomas RodriguezSep 8, 2025
What to do if Internet Explorer blocked file download on Panasonic WJ-NV200K DVR?
- M
  Mrs. Kristin ClarkSep 8, 2025
  If you see the message: 'To help protect your security, Internet Explorer blocked this site from downloading files to your computer,' on the information bar, click the information bar and select 'Download File...'. If the download still fails, go to the Tools menu in Internet Explorer, click 'Internet Options', then the 'Security' tab. Click 'Custom Level…' and in the 'Security Setting' window, under 'Downloads', select 'Enable' for 'Automatic prompting for file downloads'. Click 'OK', and when the warning window appears, click 'Yes'.
T
Teresa WilliamsAug 23, 2025
What to do if I cannot access Panasonic DVR from the web browser?
- D
  Dr. Hunter RoweAug 23, 2025
  Check the following: * Ensure the Ethernet cable is firmly connected to the 10BASE-T, 100BASE-TX or 1000BASE-T port. * Confirm the link indicator (orange) of the network port is lit; if not, LAN connection might not be established or the network is not working. * Verify a valid IP address is set and that you are not accessing the wrong IP address by pinging the DVR's IP address. * Ensure the same IP address is not assigned to other devices and that there are no contradictions between the address and the network subnet being accessed. If the recorder and PC are on the same subnet, ensure the same subnet is set for both.
S
samantha17Aug 25, 2025
Why is the Panasonic WJ-NV200K DVR error indicator lights orange and the recorder stops?
- J
  James AndersonAug 25, 2025
  The Panasonic DVR recorder may stop due to a thermal error. This can occur if the cooling fan is out of order, the ventilation openings or the cooling fan are blocked, or the temperature inside the recorder is too high or low. Check if dust is collected around the ventilation openings and ensure the recorder is used at appropriate ambient temperatures.
K
Kayla BakerAug 27, 2025
What to do if the Panasonic DVR "Thermal error" indication is displayed on the main monitor?
- K
  Karen ConnerAug 27, 2025
  The "Thermal error" indication appears when the ambient operating temperature exceeds +45 °C {113 °F}. It's recommended to change the installation environment to maintain an ambient temperature of approximately +25 °C {77 °F}.
L
liukennethAug 27, 2025
Why is my Panasonic WJ-NV200K DVR clock keeping bad time?
- C
  Crystal HunterAug 27, 2025
  The clock of the Panasonic DVR may keep bad time if the built-in battery has not been sufficiently charged. Charge the built-in backup battery by turning on the power for 48 hours or more. Also, the built-in backup battery may be depleted; its life is around 5 years, indicating it may need replacement.
T
Tanner McdanielAug 29, 2025
What to do if Panasonic DVR recording cannot be performed?
- B
  brownsamuelAug 29, 2025
  Check if "On" is selected for "Recording mode" and ensure the settings are appropriate. Also, verify that the settings of the schedules are appropriate.
W
William MillerSep 14, 2025
How to fix 'Cannot access from the browser' on Panasonic WJ-NV200K?
- J
  James HillSep 15, 2025
  If you cannot access the Panasonic DVR from the browser, check the following: * Ensure the Ethernet cable is firmly connected to the 10BASE-T, 100BASE-Tx or 1000BASE-T port. * Confirm the connection indicator of the 10BASE-T/100BASE-TX port is lit. If not, contact your system administrator. * Consult your system administrator to verify the IP addresses are valid. * Check the connection by using the command prompt: ping "IP address of this unit". If there's no reply, check the IP address and subnet mask settings. * Consult your system administrator if the same IP address is assigned to other devices. * When accessing the recorder in the same subnet, it's recommended to enter the recorder's address in the "Don't Use Proxy For These Addresses" box to avoid conflicts.
R
rrubioSep 10, 2025
How to allow pop-ups on Panasonic WJ-NV200K DVR?
- G
  Gloria GarciaSep 10, 2025
  If you see the message: 'Pop-up blocked. To see this pop-up or additional options, click here…' on the information bar, click the information bar and select 'Always Allow Pop-ups from This Site'. In the dialog window that appears, 'Allow pop-ups from this site?', click the [Yes] button.
J
Jennifer MillerSep 7, 2025
What to do if I cannot copy data on the SD memory card of my Panasonic WJ-NV200K DVR?
- S
  Sara BlakeSep 7, 2025
  Ensure that you are using a recommended SD memory card, as some SD memory cards may not be compatible with this recorder. It is recommended to use Panasonic's SD memory card. Also, verify that the SD memory card is formatted and that data are being copied to the SD memory card.
M
michaelthomasSep 4, 2025
What does "Communication error :cc" indication mean on my Panasonic WJ-NV200K DVR?
- D
  darylpattersonSep 4, 2025
  The "Communication error :cc" indication on the main monitor suggests that the camera might not be connected correctly or firmly. Check the camera connection to ensure it is properly connected.

Panasonic WJ-NV200K Specifications

General

Category	DVR
Recording Resolution	1920 x 1080
Hard Disk Drive Bays	1
Audio Output	1 x RCA
USB Ports	2 x USB 2.0
Video Compression	H.264
Video Output	1 x HDMI
Network Interface	1 x RJ-45
Power Supply	AC 100V - 240V
Operating Temperature	0°C to 40°C