Play images from a designated point
Play button Calendar
It is possible to start playback from a designated time and date or the latest recorded image.
Play image recorded at a designated time and date
Start playback by designating the time and date of a recorded image on the date & time operation panel.
Date & time operation panel (normal display)
Step 1
Click the [D]/[C] button in the [Playback] box to set
the time and date to be played.
Step 2
Select the month from the calendar in which time and
date of the image to play back is included.
Clickthe[<<Y]/[Y>>]buttontochangetheyearand
the[<M]/[M>]buttontochangethemonth.
Note:
• Thecurrentdateisdisplayedinblue.
Step 3
Click the time and date of the image to play back
from the calendar.
→ The frame around the selected date turns green,
and playback starts at the designated time and
date.
The date & time operation panel will change to
playback display (☞ page 29). At the same time,
the playback operation panel (☞ page 25) is dis-
played at the bottom of the date & time operation
panel.
Note:
• Unlessyouwanttochangethetimeanddateon
the calendar, click the playback button.
Step 4
To stop playback and return to live images, click the
[Live] button or the stop button on the playback oper-
ation panel.
→ Playback will stop, and live images will be dis-
played.
Note:
• Playbackcanalsobestoppedandliveimages
displayed by the following operations:
• Clickingthe[x]buttononthedate & time oper-
ation panel (playback display)
• Changingtheplaybackmedium
• Whenthereisnoimagestoredundertheentered
time and date, proceed as follows:
• Whenthereareimagesrecordedafterthedes-
ignated time and date, the oldest image
recorded after the designated time and date
will be played.
• Whentherearenoimagesrecordedafterthe
designated time and date, the newest image
recorded before the designated time and date
will be played.