Panasonic WJ-NV200K - Search and play; Play images selected from logs (log search)

30
31
Step 1
Click the [Alarm] button or [Error] button on the status
display panel.
→ The corresponding [Log] buttons will be displayed.
Step 2
Click the [Log] button.
→ The date & time operation panel and camera con-
trol panel are changed over to the alarm log panel
or error log panel.
Search and play
Search a desired recorded image and play it. There are the following 2 searching methods.
 • Playimagesselectedfromalarmanderrorlogs(Logsearch)
 • Searchandplayimagesrecordedtriggeredbythemotiondetectionofthecamera(VMDsearch)
Searched images will be played on a 1-screen on the main monitor. To display on a multiscreen, switch to
multiscreen display after playback has started.
Play images selected from logs (log search)
Display the alarm log list or error log list, and click a time and date to play the corresponding recorded images.
Step 3
Select the line with the desired time and date, and
click the [Play] button on the playback operation
panel. (☞ Page 25)
→ Playback will start from the time and date select-
ed.
Note:
 • Playbackcanalsobestartedbydouble-clicking
the desired time and date line.
Step 4
To stop playback and return to live images, click the
stop button on the playback operation panel.
(☞ Page 25)
→ Playback will stop, and live images will be dis-
played.
Note:
 • Playbackcanalsobestoppedandliveimages
displayed by the following operations:
 • Clickingthe[x]buttononthedate & time oper-
ation panel (playback display)
 • Changingtheplaybackmedium