Panasonic WJ-NV200K - Auto Functions (Auto Panning, Etc.)

88
89
Auto functions (auto panning, etc.)
Activate the auto function of the camera according to the settings of the camera.
Step 1
Click the [C] button in the [Auto mode] box, and then
select the desired auto function from the following.
Auto track: The camera will automatically track an
object moving on the screen.
Auto pan: The camera direction will automatically
move (pan) between the start point and end
point set in advance.
Preset sequence: The camera will move (pan) to
the preset positions registered in advance in
order of the preset position number (numerical
order).
Patrol: The camera will trace the manually record-
ed panning pattern.
Step 2
Click the [Start] button to start the selected auto
mode function.
Click the [Stop] button to turn off the auto mode func-
tion.
Note:
 • Refertotheoperatinginstructionsoftheconnect-
ed camera for further information about the auto
mode function of the camera.