Live images can be recorded on the recorder. Images from up to 6 cameras can be simultaneously recorded
with this recorder.
Record images (schedule recording)
Recording can be automatically started and stopped according to a previously specified schedule. Refer to the
Installation Guide for schedule recording.
Note:
• Wheneventrecordingistriggeredbyanalarmduringtheschedulerecording,eventrecordinghasthehigher
priority. Refer to the "Recording mode and its priority" section below for further information about the priori-
ty of the recording mode.
• Tostopschedulerecording,stoptherecordingonthesetupmenu.RefertotheInstallationGuideforfurther
information.
• Incaseofanetworkerror,theimageofthecamerawherethecommunicationerrorhasoccurredwillnotbe
recorded. Recording starts when the network error is recovered.
• Schedule-recordedimagedatawillbedividedintomultiplefileseveryhouronthehour.Inthatmoment,
recording may sometimes be interrupted around for 1 second.
Recording mode and its priority
There are 3 recording modes. The recording modes and their priority levels are as follows.
When two or more recordings with different recording modes started simultaneously, only recording with the
higher priority will start.
Recording mode Priority
Event recording 1
Schedule recording 2
Pre-event recording 3
Record images