Panasonic WJ-HD316 User Manual (English)

Other manuals for Panasonic WJ-HD316

Quick Operation Guide7 pages

Configurations5 pages

Specifications3 pages

Questions and Answers:

J
Jeff SavageAug 14, 2025
What to do if my Panasonic DVR says '#-nn% (available disk space low) #-FULL (no available disk space)'?
- T
  taylor30Aug 14, 2025
  If your Panasonic DVR displays '#-nn% (available disk space low) #-FULL (no available disk space)', it indicates that the hard disk is either almost full or completely full. To resolve this, press the ALARM RESET button to cancel the error or warning status. You can then initialize or replace the hard disk. Be aware that initializing the hard disk will erase all recorded data, so it is recommended to copy the data using an external recording device beforehand.
D
Danielle HillAug 18, 2025
What to do if my Panasonic WJ-HD316 shows a 'THERMAL' error?
- P
  Paige SalazarAug 18, 2025
  If your Panasonic DVR displays a 'THERMAL' error, it means a thermal error has been detected in the unit or the optional extension unit. Press the ALARM RESET button to cancel the warning status. However, if thermal errors occur frequently, the unit may be malfunctioning, and you should contact the dealer.
D
Donna YoderAug 21, 2025
What to do if Panasonic WJ-HD316 displays 'SMART' error?
- W
  williamparkAug 21, 2025
  If your Panasonic DVR displays a 'SMART' error, it suggests that the hard disk may be malfunctioning and not working correctly. Press the ALARM RESET button to cancel the warning status and contact the dealer to replace the hard disk.
S
Stephen SandersAug 25, 2025
What to do if my Panasonic WJ-HD316 DVR displays 'POWER' error?
- D
  Dan PerezAug 25, 2025
  If your Panasonic DVR displays a 'POWER' error, it indicates that the power outage alert signal is supplied from the UPS. Press the ALARM RESET button to cancel the warning status. The unit will start operation automatically after the UPS starts power supply.
N
nathan19Aug 27, 2025
What to do if my Panasonic WJ-HD316 displays 'MEDIUM-n' error?
- A
  Allison ThomasAug 27, 2025
  If your Panasonic DVR shows a 'MEDIUM-n' error, it means the external recording device is not working because a disk has not been inserted, or a disk with a different format has been inserted. Press the ALARM RESET button to cancel the warning status. Confirm that a disk has been inserted, or check the inserted disk format.
Y
ygonzalesAug 30, 2025
What to do if my Panasonic DVR displays 'H-METER' error?
- S
  Sydney BurnsAug 30, 2025
  If your Panasonic DVR displays the 'H-METER' error, the set time for the HOUR METER has passed, and it may be reaching the end of the hard disk’s lifetime. Press the ALARM RESET button to cancel the warning status and contact the dealer to replace the hard disk.
S
Sarah ClarkeSep 3, 2025
What to do if my Panasonic WJ-HD316 DVR displays 'REMOVE' error?
- B
  brianasotoSep 3, 2025
  If your Panasonic DVR displays a 'REMOVE' error, it indicates that an error has occurred on the hard disk, and the hard disk has been unmounted from the system automatically. Press the ALARM RESET button to cancel the error status and contact the dealer.
S
Steven Cochran MDSep 6, 2025
What to do if my Panasonic WJ-HD316 DVR displays 'ALT-*' error?
- T
  Timothy WilliamsSep 6, 2025
  If your Panasonic DVR displays 'ALT-*', it indicates that the recorder image has been altered. Press the ALARM RESET button to cancel the error status and press the PLAY/PAUSE button to resume playback.
R
Robert RiceSep 10, 2025
What to do if the fan is malfunctioning on my Panasonic DVR?
- L
  linda77Sep 10, 2025
  If the fan of your Panasonic DVR or the optional extension unit is malfunctioning, contact the dealer.