Panasonic WJ-HD316 - COPYING RECORDED IMAGES

45
It is available to copy (duplicate) manually the recorded
images in the copy area of the built-in hard disk to the
external recording device (DVD-RAM disk, DVD-R disk,
CD-R disk) connected to the unit.
It is recommended to make back-up copies on a regular
basis for unexpected situations such as malfunction of the
hard disk.
Manual copy is available during the following.
• While displaying of live images
• While pausing playback of recorded images
• When displaying a searching window (Recording event
list window, VMD search list window, Marking list win-
dow)
(Manual copy is not available when a thumbnail window
is displayed.)
Notes:
• The auto copy function is available for copying record-
ed images automatically. When the auto copy function
is enabled, manual copy is not available. Refer to a sys-
tem administrator for further information about the auto
copy function.
• To copy during playback of recorded images, pause
playback temporarily.
• To copy recorded images on the DVD-RAM disk, for-
matting (initializing) the DVD-RAM disk is required in
advance. Refer to page xx for the descriptions of how
to format DVD-RAM disks.
z Press the SHIFT button.
The SHIFT indicator will light.
To copy recorded image during playback, pause the play-
back temporarily.
x Press the COPY button.
The DATA COPY window will be displayed on the monitor 2
and the VGA monitor.
The DATA COPY window will not be displayed when a
thumbnail window is displayed.
In this case, display a list window using the arrows button
(DC).
c Perform the settings for data copy
(camera channel, time range, a disk
on which images is to be copied).
Move the cursor to each setting item
using the arrows button and select a
parameter rotating the jog dial.
v Select "OK" button using the arrows
button and press the SET button.
The DATA COPY window will be closed and data copy will
start.
The copy icon will be displayed on the task bar during
copying.
To close the DATA COPY window, select "CANCEL" using
the arrows button and press the SET button. The setting will
be canceled and the DATA COPY window will be closed.
COPYING (Duplicate)
LOGOUT
MONITOR1
MONITOR2
5
9
2
6
10/0
1413
3
7
11
SHIFT SEQ
COPY DISK SELECT
EL-ZOOM
TEXT
LOGOUT
4
8
12
OSD
MARK
1
15
16
BUSY
316
REV FWD
STOP PLAY PAUSE REC - REC STOP
SEARCH
SETUP
/ESC
PAN/TILT
SLOW
A-B
REPEAT
GOTO
LAST
LISTED
PA N /T I LT
ZOOM/
FOCUS
IRIS
PRESET
/AUTO
SET
–
+
cvzx
c
v
DATA COPY
CAMERA
CAMERA
COPY DRIVE
YMD :
OK CANCEL
HDD COPY AREA
COPY 1 COPY 2
2003 03
1 23456 78
9 10 11 12 13 14 15 16
30 11 03 PM
YMD :
2005 05 20 5 03 AM
When the selected COPY DRIVE is not found, copying will
not start and the DATA COPY window will not be closed
even when the SET button is pressed after selecting "OK".
PRESET REGISTRATION
Copy is canceled
OK