119
For operating the camera connected to this unit, it is required to set the camera function in advance.
Setup of camera function can be performed on the setup menu of the connected camera.
You can operate the camera setup menu by calling up it from this unit. Contents of camera setting menu and operations vary
according to the connected cameras. For further information, refer to the operating instruction of the camera.
The following is the descriptions of how to display the camera setting menu.
z Press the camera selection button for a desired camera channel and the SET button simultaneously.
→The camera setup menu will be displayed.
x Press any one of the PAN/TILT button, the ZOOM /FOCUS button, the IRIS button and the PRESET/ AUTO button to com-
plete the camera setting.
DISPLAY SETUP MENU OF CAMERA
To Next Page
Loading...
