114
● Auto Copy
Select ON or OFF whether or not to copy recorded
images to the copy area on the hard disk automatically.
OFF: Does not copy automatically.
ON: Copies recorded images to the copy area on the
hard disk of this unit.
Important:
When OFF is selected, auto copy function at an event
occurrence and emergency recording will not function.
w [Time & Date Setup] Setting of date
and time
Perform the following settings of time and date.
● Date Format
Select a display format for date from the following.(Ex.
April 1, 2003)
YY.MM.DD: 03.4.1
MMM.DD.YY: APR.1.03
DD.MMM.YY: 1.APR.03
● Time Format
Select a display format for time from the following. (Ex.
3 oÅfclock just in the afternoon)
12h: 3:00:00 PM
24h: 15:00:00
● Time Setup
Adjust the current date and time.
Enter year, month, day, hour, minute and second in
order, move the cursor to "SET" and press the SET but-
ton.
● Auto Adjust Time
Select a method for auto time adjustment from the fol-
lowing.
When "MASTER" is selected, a signal will be supplied
from the ALARM/CONTROL connector as the MASTER
time (see below) at the specified time.
OFF: Does not function.
MASTER: A signal will be supplied from the
ALARM/CONTROL connector on the rear and the
clock of other devices will be adjusted with refer-
ence to the time of this unit.
SLAVE: A signal will be supplied to the ALARM/CON-
TROL connector on the rear and clock of this unit
will be adjusted.
● Master Time
Specify the time when supplying a signal from the
ALARM/CONTROL connector.
● Summer Time (Day Light Saving)
Select a way of how to switch the summer time from
among the following.
OFF: Does not function.
ON: Applies the summer time.
AUTO: Applies the summer time in accordance with the
setting of the summer time (see next page).
● Summer Time (Day Light Saving) Table
Do the following to specify the start time & date and
end time & date of the summer time.
[Screenshot 1]
Start operation from the "Time & Date" menu.
z Move the cursor to "Summer Time (Day Light Saving)
Table" using the arrows button ($TD $TC) to and press
the SET button.
[Screenshot 2]
The "Summer Time (Day Light Saving) Table" will be dis-
played.
x Move the cursor to enter the ON or OFF time (year,
month, date) for the summer time using the arrows but-
ton.
User Regist.
Host Regist.
User Regist.
Host Regist.
User Regist.
Host Regist.
To Next Page
Loading...
