43
■ Alarm Function
● Blinks the ALARM indicator on the front
panel
● Switches the displayed images on the moni-
tor 1 and the monitor 2 to the images from a
location of an alarm occurrence (on a single
screen)
● Displays the event information in the alarm
display area on the monitor 1 and the cam-
era title display area on the monitor 2
● Sounds the buzzer
Contact to a system administrator about sounding duration.
● Notifies an event occurrence to the con-
nected system device (Alarm Output)
Sends a signal to the device connected to the
ALARM/CONTROL connector, and the connected device
such as a buzzer will be activated.
● Starts recording automatically
Starts recording the image from a location of an event
occurrence automatically.
● Moves a camera to the preset position
A camera will move to the preset position registered in
advance.
● Notifies an event occurrence by sending e-
mails
E-mails will be sent to addresses registered in advance.
Refer to the Network Operating Instructions (pdf) on the
provided CD-ROM.
To Next Page
Loading...
