Panasonic WJ-NV200K - Display the operation window; Enter Recorder IP Address or URL; Enter User Name and Password

56
57
Step 3
Enter the user name and password registered in the
recorder, and then click the [Login] button.
→ The top page will be displayed.
Important:
 • Refertoanetworkadministratorforthesetuser
name and password.
 • RefertotheInstallationGuideforhowtoregister
users.
 • Thedefaultadministratornameandpasswordare
as follows.
Administrator name: ADMIN
Password: 12345
 • Toenhancethesecurity,changetheadministrator
name and password before running the recorder.
Change the password periodically. Refer to the
Installation Guide for how to change the pass-
word.
 • Refertopage 92 when a message is displayed on
the information bar or when an unnecessary sta-
tus bar or scroll bar is displayed on the window.
Display the operation window
Boot the PC and operate the recorder using a web browser.
Step 1
Start the web browser.
Step 2
Enter the IP address or URL assigned to the recorder
into the [Address] box, and then press the [Enter] key.
→ The authentication window will be displayed. The
authentication window will not be displayed when
"Off" is selected for "User authentication" on the
[Basic] tab of "User management" of the setup
menu.
Important:
 • Refertoasystemadministratorforfurtherinfor-
mation about the set IP address.
 • Donotattach"0"beforethenumberswhenenter-
ing IP address.
Example: b 192.168.0.50
× 192.168.0.050
 • Ifamessageisdisplayedontheinformationbar,
see page 92.
Note:
 • Whenthetoppageisdisplayedforthefirsttime,
the install wizard of the ActiveX control required to
display images from the camera will be displayed.
Follow the instructions of the wizard.
 • TheActiveXcontrolandtheviewersoftware(☞
page 82) will be installed at the same time.
 • Followtheinstructionsofthewizardtocomplete
the installation. When any ActiveX for a Panasonic
recorder other than this product is already
installed, uninstall "WebVideo ActiveX" from
"Uninstall a program" and then install ActiveX for
this product. (☞ Page 82)
 • Whentheinstallationwizardisdisplayedeach
time displaying other page even though installa-
tion of ActiveX for this product has been complet-
ed, reboot the PC.
 • TheviewersoftwareusedoneachPCshouldbe
licensed individually. Refer to your dealer for the
software licensing.