Panasonic WV-CW384

12
xSecure the camera mount bracket
• When the camera is directly installed on a wall
Use 4 screws (locally procured) to secure the camera
mount bracket to a wall or a junction box (locally pro-
cured).
Mounting screw x4 (locally procured)
Camera mount bracket
22 mm {7/8"}
46 mm {1-13/16"}
83.5 mm {3-1/4"}
Cable access hole
6 mm (W) x 10 mm (L) {1/4" (W) x 3/8" (L)}
(long hole)
Mounting screw x4 (locally procured)
Junction boxe
s
Camera mount bracket
46 mm {1-13/16"}
83.5 mm {3-1/4"}
6 mm (W) x 10 mm (L)
{1/4" (W) x 3/8" (L)} (long hole)
If a junction box is used, putting the boxes side by side
is recommended as shown in the illustration at right. (for
easy cable passing)
• When the camera is installed on a wall using the
adapter box
1. Use 4 screws (locally procured) to secure the adapter
box to a wall or a junction box (locally procured).
• If a junction box is used, putting the boxes side by side
is recommended as shown in the illustration at right.
(for easy cable passing)
46 mm {1-13/16"}
22 mm
{14/16"}
83.5 mm {3-5/16"}
24.5 mm {31/32"}
Hole 6 mm (W) x 10 mm (H)
{1/4" (W) x 13/32" (H)}
Cable access hole (used for wiring)
(G3/4" internal thread)
Mounting screw x4
(locally procured)
Center of
adapter box
Cable access hole
Adapter box
46 mm {1-13/16"}
83.5mm
{3-5/16"}
Mounting screw x4
(locally procured)
Junction boxes
Hole
6 mm (W) x 10 mm (H)
{1/4" (W) x 13/32" (H)}