23
Connections
● Video Output Connection
Connect the video output connector to the
monitor or other system device with the pro-
cured coaxial cable. The maximum extensi-
ble length is shown in the table.
* When using 12 V DC power supply, the
optional heater unit is unavailable.
To 24 V AC or 12 V DC
power supply
Video output cable
(Approx. 22 cm {8.66"})
Brown (Live)
Blue (Neutral)
Green/Yellow (GND)
To GND
BNC connector BNC connector
BNC connector
To VIDEO IN
Power cable
(Approx. 26 cm
{10.24"})
Wire Color 24 V AC 12 V DC
Brown 24 V AC (L) Positive
Blue 24 V AC (N) Negative
Green/Yellow To GND
● Power Connection
Precaution:
The following connections should be
made by qualified service personnel or
system installers in accordance with NEC
725-51.
RG-15/U
(10C-2V)
800
RG-11/U
(7C-2V)
RG-6/U
(5C-2V)
RG-59/U
(3C-2V
)
Type of coaxial
cable
Recommended
maximum
cable length
m
ft
2 640
600
1 980
500
1 650
250
825
• Wire Colors & Functions
Camera power cable
Cautions:
• Be sure to connect the GND (grounding)
lead of the camera and grounding termi-
nal of the power supply when using a 24
V AC power source.
• Shrinking the cable-entry seal is a one-
time procedure. Do not shrink the cable-
entry seal until it has been ascertained
that unit is functioning.
ONLY CONNECT THIS TO 24 V AC or 12
V DC CLASS 2 POWER SUPPLY.
• To prevent fire or electric shock hazard,
the UL listed wire VW-1 style 1007 should
be used for the cable for Input Terminals.
• Do not use a transformer larger than
10 VA.
Caution:
ONLY CONNECT THIS TO 24 V AC or 12 V DC CLASS 2 POWER SUPPLY.
To Next Page
Loading...
