Panasonic WV-CW484S

47
Adjusting angle: Panning range: ±175 °
Tilting range: ±75 °
Azimuth range: ±160 °
Major items on menu setup (Factory default settings are underlined.)
Language: ENGLISH
, FRENCH, GERMAN, SPANISH, ITALIAN, RUSSIAN,
JAPANESE, or CHINESE
Camera ID: Up to 16 characters
Light control: ALC
Super Dynamic 3: ON
or OFF
Electronic shutter speed: OFF (1/60)
, 1/100, 1/250, 1/500, 1/1 000, 1/2 000, 1/4 000,
1/10 000 s
AGC: ON (HIGH
/MID/LOW), or OFF
Sensitivity enhancement: OFF
, x2 AUTO, x4 AUTO, x6 AUTO, x10 AUTO, x2 FIX, x4 FIX,
x6 FIX, x10 FIX, x16 FIX, x32 FIX
Synchronization: VD2, LL, or INT
White balance: ATW1, ATW2, or AWC
Motion detection: MODE1, MODE2, or OFF
Digital noise reduction: HIGH or LOW
Resolution: NORMAL or HIGH
Black-and-white mode: AUTO1, AUTO2, ON, or OFF
Privacy zone: ON (1/2), or OFF
Electronic zoom: ON or OFF
Upside down positioning: ON or OFF
Auto image stabilizer: ON or OFF
Lens: Panasonic or other
Back-focus adjustment: ABF, MANUAL, AUTO
/PRESET/FIX
Special: Chroma, Aperture, Pedestal, Hue, Pixel Compensation
Weights and dimensions indicated are approximate.
Standard Accessories
Operating Instructions (This document) .............................................................. 1 pc.
Warranty Card ..................................................................................................... 1 pc.
The following parts are used during installation procedures.
Mounting Bracket (For WV-CW484S, WV-CW484SK) ......................................... 1 pc.
Screws for mounting bracket (M4 x 8) (For WV-CW484S, WV-CW484SK) ......... 4 pcs.
Camera attachment ............................................................................................. 1 pc.
Bit for tamperproof screw .................................................................................... 1 pc.
Butyl tape ............................................................................................................ 1 pc.