Symptom
No picture is displayed.
-44-
TROUBLESHOOTING
HTML documents are not displayed.
• Is the AC adapter firmly plugged in to the outlet?
• Are the POWER IN terminals on the camera connected with
the AC adapter properly?
• Is the lens cap removed?
• Is the video cable or network cable connected properly?
• HTML files in the camera might be broken. Initializing is
required.
10
10
8
10, 11
36
Cannot access the camera from the
browser.
• Are the network cables connected properly?
• Is the status indicator lamp of the network connection termi-
nal lighting?
If not, the network connection is not established or the other
devices are not in operation.
• Is a valid IP address set for the camera?
• Are you connecting to a wrong IP address?
Open the command prompt on your PC and enter:
>ping (enter here the IP address set for the camera).
If the camera replies, the connection is correct.
If not, set the correct IP address to your PC and/or to the
camera.
10, 11
7
12
What to do Reference page
To Next Page
Loading...
