Panasonic WV-SC386 - Detach the Camera

Step 4
Rotate the camera counterclockwise to detach the cam-
era from the camera mount bracket (accessory).
IMPORTANT:
 • When mountingthe camera onto thecameramount
bracket, hold the main body of the camera. Mounting
the camera while holding the dome cover may result
in malfunction.
Step 5
Detach the cables from the camera.
Step 6
Detach the safety wire from the camera.
Detach the camera
The camera is fixed on the camera mount bracket using the fixing screw. Remove the camera by following the instructions
below.
IMPORTANT:
 • Donotdetachthecamerainadifferentwayfromtheonedescribedbelow.Itmaydamagethecamera.
Step 1
Detach the decorative cover from the camera.
• Pullthedecorativecoverdowntoremoveitfromthe
ceiling.
• Releasethestoppersbypressingthedecorativecover
in the direction of the arrows on the side decorative
cover.
Release both stoppers.
Hold securely and
disengage them.
Hold securely and
disengage them.
IMPORTANT:
 • Makesurethatnocableispinchedbythedecorative
cover.
Step 2
Detach the 12 V DC power cable plug (accessory) and the
LAN cable from the camera, and then turn off the power
of the camera.
20
°
Rotate
Camera mount bracket
(accessory)
Main body of
the camera
Step 3
Remove the fixing screw (M3, accessory) that is fixing the
camera on the camera mount bracket (accessory).
Do not lose the fixing screw.
22