To Next PageTo Next PageWhat does it mean if live indicator keeps blinking red on Panasonic WV-SC588?
If the live indicator on your Panasonic Security Camera keeps blinking red, the camera may be out of order. Contact your dealer.
Why does my Panasonic Security Camera authentication window keep popping up?
If you're repeatedly seeing the authentication window when trying to access your Panasonic Security Camera, try closing the web browser and accessing the camera again. This issue may occur if the username or password has been changed, or if there were changes to the authentication settings.
Why is no image displayed on my Panasonic WV-SC588?
If no image is displayed from your Panasonic Security Camera, ensure that the viewer software is installed on your PC. This software is required to view the camera's video feed.
What to do if Panasonic Security Camera cannot download the log list?
To resolve the issue of not being able to download the log list from your Panasonic Security Camera, you may need to enable file downloads in Internet Explorer. In the security settings, select 'Enable' for 'Automatic prompting for file downloads'.
How to fix Panasonic Security Camera when I cannot access it from the web browser?
First, ensure the LAN cable (category 5e or better) is firmly connected to the camera's network connector. Check if the link indicator is lit; if not, there may be a LAN connection issue or network malfunction. Verify that the camera's power is on and that the set IP addresses are valid. Ping the camera's IP address to check the connection; if there's no reply, examine the connection methods.
What to do if Panasonic WV-SC588 Security Camera doesn't move to preset positions accurately?
When the preset positions becomes inaccurate during use, it is possible to correct the positions by executing the position refresh function. In addition, when “Position refresh” is set for the created schedule, the camera position will be corrected periodically. In some situations, reconfigure the preset positions.
How to fix Panasonic WV-SC588 audio input with noise?
If your Panasonic Security Camera's audio input contains noise, check the following: grounding of the camera, a switching hub, or peripheral devices. Also, consider whether the camera is near an electrical power line or a device that produces strong magnetic fields or radio waves (such as a TV/radio antenna, a motor of an air conditioning system, or a transformer). If the audio input still contains noise even after checking the above possibilities, use a powered microphone or connect audio output with low output impedance.
Why Panasonic WV-SC588 starts panning unpredictably?
If your Panasonic Security Camera starts panning unpredictably, this may be caused by noise. Check the exogenous noise level around the camera.
How to fix Panasonic Security Camera when I cannot download the log list?
If you cannot download the log list, enable automatic prompting for file downloads in Internet Options, as downloading files using Internet Explorer may be disabled.
Why can't I access my Panasonic WV-SC588 Security Camera from a cellular phone?
If you cannot access your Panasonic Security Camera from a cellular phone, verify that the URL is entered correctly, ensuring '/mobile' is included at the end.
General| Total megapixels | 2.4 MP |
|---|---|
| Maximum resolution | 1920 x 1080 pixels |
| Supported video modes | 1080p |
| Video formats supported | H.264 |
| Pan range | 0 - 360 ° |
| White balance | Auto |
| Tilt angle range | -25 - 205 ° |
| Camera shutter type | Electronic |
| Camera shutter speed | 1/10000 s |
| Minimum illumination | 0.06 lx |
| Sensor type | MOS |
| Optical sensor size | 1/2.8 \ |
| Digital zoom | 12 x |
| Optical zoom | 90 x |
| Focal length range | 4.9 - 129 mm |
| Normal focusing range | 2 m |
| Security algorithms | HTTPS |
| Video motion detection | Yes |
| Built-in HDD | - |
| Compatible memory cards | SD, SDHC, SDXC |
| Type | IP security camera |
| GPS (satellite) | No |
| Placement supported | Indoor |
| Connectivity technology | Wired |
| Form factor | Dome |
| Mounting type | Ceiling |
| Product color | White |
| Interface | RJ-45 |
| Ethernet LAN (RJ-45) ports | 1 |
| Cabling technology | 10/100Base-T(X) |
| Supported network protocols | IPv6: TCP/IP, UDP/IP, HTTP, HTTPS, RTP, FTP, SMTP, DNS, NTP, SNMP, DHCPv6 , ICMP, ARP IPv4: TCP/IP, UDP/IP, HTTP, HTTPS, RTSP, RTP, RTP/RTCP, FTP, SMTP, DHCP, DNS, DDNS, NTP, SNMP, UPnP , IGMP , ICMP , ARP |
| DC output current | 1 A |
| DC output voltage | +12V |
| Power source type | PoE |
| Operating temperature (T-T) | -10 - 55 °C |
| Operating relative humidity (H-H) | 0 - 90 % |
Weight and Dimensions| Width | 144 mm |
|---|---|
| Height | 208 mm |
| Weight | 1300 g |
Instructions on how to view live images from one camera on a PC using a web browser.
Explanation of the various elements and functions displayed on the camera's live viewing page.
Guide to displaying images from multiple cameras simultaneously on a multi-screen setup.
Steps to connect to and view JPEG images from the camera using a cellular phone.
Instructions for viewing MJPEG images from the camera on mobile terminals like iPad/iPhone/Android.
Details on various alarm types that trigger camera actions, including terminal, VMD, and command alarms.
Describes how the camera performs actions when an alarm is detected.
Configure automatic transmission of alarm images to an FTP server upon detection.
Set up periodic transmission of images to an FTP server at specified intervals.
Details on log display formats for JPEG recording, including alarm and manual logs.
Explains log display formats for H.264 recording, including alarm and manual/schedule logs.
Instructions for playing back recorded JPEG images from the SD memory card.
Instructions for playing back recorded H.264 video data from the SD memory card.
Overview of security features like user authentication, HTTPS, and port changes.
Step-by-step guide to accessing and logging into the camera's setup menu.
Instructions on navigating and configuring settings within the camera's setup interface.
Explanation of the different tabs and sections within the camera's setup menu.
Setting up fundamental camera parameters like title, date, time, and basic configuration.
Configuring network settings for internet access, including UPnP and DDNS.
Settings for managing the SD memory card, including recording formats and capacity.
Procedure for copying images stored on the SD memory card to a PC.
Settings for saving and managing various types of logs, including alarm and FTP error logs.
Setting the image capture mode for JPEG and H.264 streams for specific camera models.
Detailed configuration for H.264 image quality, bit rate, and transmission settings.
Settings for camera operations like home position, self-return, and digital zoom.
Configuring image adjustments, preset positions, auto pan, patrol, and auto track functions.
Setting up Variable Image Quality on Specified area to optimize image data transmission.
Settings for audio transmission/reception, encoding format, and volume levels.
Defining camera actions upon alarm detection, such as moving to preset positions or auto tracking.
Setting up Video Motion Detection areas for triggering alarms based on movement.
Configuring the camera to detect sound levels and trigger alarms based on audio input.
Setting up email notifications for alarms, system events, and SD card status.
Configuring XML notifications for transmitting auto track information to servers.
Managing user accounts, access levels, and authentication methods for camera access.
Restricting PC access based on IP addresses and configuring access levels.
Optimizing image quality and refresh interval for concurrent users via priority streaming.
Setting up SMTP and POP server details for sending alarm emails.
Configuring FTP server details for transmitting alarm images and other data.
Configuring NTP server settings for accurate time synchronization.
Setting up IP address, subnet mask, gateway, and DNS for network connectivity.
Steps to enable HTTPS for secure camera access, including certificate generation.
Guide to accessing the camera securely via HTTPS, including certificate installation.
Setting up Dynamic DNS services like Viewnetcam.com for internet access.
Configuring scheduled FTP transmission of images to an FTP server.
Viewing and managing system logs for troubleshooting and monitoring camera status.
Instructions for updating the camera's firmware to the latest version.
Reviewing the current status of various camera functions and network settings.
Procedures for resetting camera settings to default or rebooting the unit.
Overview of the CD launcher utility for software installation and access.
Step-by-step guide to installing the Panasonic IP Setting Software for network configuration.
Instructions for installing the viewer software required to display camera images.
Using IP Setting Software to configure camera network settings like IP address and subnet mask.
