Panasonic WV-S6131

Panasonic WV-S6131

37 pages

To Next Page

To Next Page

Loading...

Before attempting to connect or operate this product,

please read these instructions carefully and save this manual for future use.

The model number is abbreviated in some descriptions in this manual.

Important Information

Network Camera

WV-S6130WV-S6131

* For information about the installation tasks, refer to the provided Installation

Guide. For information about how to perform the settings and how to

operate the camera, refer to the Operating Instructions on the provided

CD-ROM.

Model No. WV-S6131 / WV-S6111

WV-S6130

LOCK

OPEN

WV-S6130

Questions and Answers:

E
Evan CantrellAug 16, 2025
Why does Panasonic Security Camera status indicator blink orange?
- M
  Mr. Richard BellAug 16, 2025
  If the status indicator on your Panasonic Security Camera blinks orange approximately every 2 seconds, it could be due to a few reasons. First, the router might not be powered on, causing a UPnP error; in this case, turn on the router. Second, an error may have occurred during the port update by the UPnP function; to resolve this, perform the port forwarding setting for the router and deactivate the setting of auto port forwarding for the camera. Finally, the UPnP function of the router might be disabled; refer to the router's operating instructions to enable the UPnP function.
J
jessica62Aug 19, 2025
What to do if Panasonic Security Camera status indicator lights red?
- R
  Richard HayesAug 19, 2025
  If the status indicator on your Panasonic Security Camera lights up red, there are several potential causes. Check if the write protect switch of the inserted SD memory card is set to 'LOCK', and if so, unlock it. Also, ensure the SD memory card was formatted on the camera, not a PC; use an SD memory card formatted on the camera. Finally, the inserted SD memory card might be faulty, so try replacing it with a normal one.
C
Crystal ChapmanAug 21, 2025
How to fix Panasonic Security Camera panning unpredictably?
- P
  Paul PatelAug 21, 2025
  If your Panasonic Security Camera starts panning unpredictably, it could be due to a couple of reasons. The issue may be caused by noise, so check the exogenous noise level around the camera. Alternatively, the protection circuit against high temperature may be functioning. When the digital flip continues for a given time in high temperature, the system releases the digital flip and operates panning and tilting automatically to return the screen to the original position.
R
rachel15Aug 25, 2025
What to do if Panasonic WV-S6131 Security Camera audio input contains noise?
- J
  Javier LopezAug 25, 2025
  If the audio input of your Panasonic Security Camera contains noise, consider the following checks: - Check the grounding of the camera, a switching hub, or peripheral devices. - Check if the camera is used near an electrical power line. - Check if the camera is used near a device that produces a strong magnetic field or radio waves. - Use a powered microphone or connect audio output with low output impedance.
A
Andrew PrattAug 27, 2025
How to fix Panasonic WV-S6131 not turning on?
- S
  Stacy HollandAug 28, 2025
  If your Panasonic Security Camera is not turning on, consider these checks: - When using a PoE device for power supply, verify that the connection is appropriately established. - When using a DC power supply, check the specifications regarding the AC adapter. - When using a DC power supply, ensure it is attached correctly and firmly.
A
Andrew MoyerAug 30, 2025
Why Panasonic WV-S6131 Security Camera does not move to the preset positions accurately?
- H
  heathercastilloAug 30, 2025
  If your Panasonic Security Camera does not move to the preset positions accurately, you can correct the positions by executing the position refresh function. When 'Position refresh' is set for the created schedule, the camera position will be corrected periodically. In some situations, reconfigure the preset positions.
C
Carol PrattSep 3, 2025
What to do if Panasonic WV-S6131 Security Camera stops panning or tilting with mechanical noise?
- S
  Scott KennedySep 3, 2025
  If your Panasonic Security Camera stops panning or tilting and you hear mechanical noise, carry out the refresh position function from the [Default reset] tab of the 'Maintenance' page of the setup menu.
R
Richard TaylorSep 5, 2025
What to do if Panasonic WV-S6131 Security Camera status indicator never lights up?
- J
  Jacob SullivanSep 6, 2025
  To solve this problem, select 'On' or 'On(Access)' for the indicator setting.
O
owensamandaSep 8, 2025
What to do if Panasonic Security Camera status indicator lights or blinks orange when powered on?
- C
  Catherine RamirezSep 8, 2025
  If the status indicator lights or blinks orange when you turn on your Panasonic Security Camera, ensure the Ethernet cable is connected appropriately. Also, verify that the hub or router in use is operating correctly. If the problem persists, try replacing the Ethernet cable with another one.
J
Jessica PetersonSep 12, 2025
Why is Panasonic WV-S6131 image refresh interval long on the web browser?
- A
  Aaron HernandezSep 12, 2025
  These cases may be improved by using a PC with optimal specifications.

Panasonic WV-S6131 Specifications

General

Camera Type	Network Camera
Maximum Resolution	1920 x 1080
Digital Zoom	12x
Wide Dynamic Range (WDR)	Yes
Frame Rate	60 fps
Audio Compression	G.711, G.726
Ingress Protection	IP66
Vandal Resistance	IK10
Signal System	NTSC/PAL
Pan Range	360°
Day/Night Function	Yes
Video Compression	H.264, H.265
Audio Input/Output	1 Input / 1 Output
Alarm Input/Output	2 inputs, 2 outputs
Edge Recording	Yes
Power Source	PoE (IEEE802.3af)
Operating Temperature	-10°C to +50°C

Summary

Main Functions Overview

Zoom, Presets, and Image Technology

User Manuals and PC System Requirements

PC System Requirements

Lists necessary hardware, OS, and browser for PC operation.

Network Security

Product Precautions

Safety Warnings for Installation and Environment

Covers risks related to installation, atmosphere, and physical environment.

Operational and Handling Safety

Details safety measures during operation, maintenance, and general handling.

Continued Precautions and Battery Safety

Lens Surface and General Safety

Warns against touching the lens surface and provides general safety advice.

Advanced Precautions and Maintenance

Precautions for Installation

Installation Location and Mounting

Guides on selecting suitable installation areas and mounting methods.

Prohibited Installation Locations

Lists environments and locations where the camera should not be installed.

Installation Precautions and Network Setup

Noise, PoE, and Router Configuration

Addresses noise reduction, PoE requirements, and router settings for connectivity.

Parts and Functions Overview

Camera Unit Identification

Rear Terminals and Network Connection

Network Connector (RJ45)

Explains how to connect the Ethernet cable for network communication.

Audio and Power Terminals

12 V DC Power Supply and Audio Connectors

Indicators and Buttons - S6131 S6111

Memory Card Cover and Connection Terminals

Indicators and Buttons - S6130

S6130 Component Identification

Initialization and SD Card Status

INITIAL SET Button Functionality

Details the procedure for initializing the network camera using the INITIAL SET button.

SD MOUNT Indicator Status

Status Indicators and SD Card Control

Status Indicator Meanings

SD ONOFF Button Operation

SD Memory Card Insertion

Inserting SD Card (S6131 S6111)

Inserting SD Card (S6130)

SD Memory Card Removal and Formatting

Removing SD Memory Card

Troubleshooting Guide

Power and Movement Troubleshooting

Addresses issues with power not turning on and inaccurate preset positions.

PanningTilting and Noise Issues

Provides solutions for mechanical noise and unpredictable panning/tilting.

Troubleshooting: Indicators and Connectivity

Indicator Lights and Network Errors

Explains status indicator behavior and troubleshooting UPnP/network errors.

Troubleshooting: SD Card and Audio Issues

SD Card Errors and Audio Noise

Guides on resolving SD card write errors and audio input noise.

Specifications - Basic

Power, Environment, and IO Terminals

Specifications - Physical and Camera Details

Mass, Finish, and Image Sensor

Specifications - Camera Settings

Image Settings and Control

Specifications - Lens and PanningTilting

Lens Specifications and Zoom Ratio

Specifications - Image Compression and Coding

Image Compression and Bit Rate Settings

Smart Coding and Audio Options

Specifications - Network and Compatibility

Protocols, Security, and OSBrowser Compatibility

Related product manuals

Panasonic WV-S6130

Preview: Panasonic WV-SW396

Panasonic WV-SW396

Preview: Panasonic WV-SF438

Panasonic WV-SF438

Preview: Panasonic WV-SW175

Panasonic WV-SW175

Panasonic WV-SW458

Preview: Panasonic WV-SP105

Panasonic WV-SP105

Preview: Panasonic WV-SC384

Panasonic WV-SC384

Preview: Panasonic WV-SC385

Panasonic WV-SC385

Preview: Panasonic WV-SC386

Panasonic WV-SC386

Panasonic WV-SW172

Preview: Panasonic WV-SW355

Panasonic WV-SW355

Panasonic WV-ST165