21
• Basic
WV-SFV631L/WV-SFV631LT/
WV-SFV611L
WV-SFR631L/WV-SFR611L
WV-SFN631L/WV-SFN611L
Power source *
1
: DC 12 V, PoE (IEEE802.3af compliant)
Power consumption *
1
:
When IR LED is ON
(PoE: Class 0 device)
SF V 631L
SF V 631LT
DC 12 V:
1080 mA/Approx. 12.9 W
PoE DC 48 V:
270 mA/Approx. 12.95 W*
SF R 631L
SF N 631L
DC 12 V:
760 mA/Approx. 9.1 W
PoE DC 48 V:
240 mA/Approx. 11.1 W
SF V 611L
DC 12 V:
1010 mA/Approx. 12.1 W
PoE DC 48 V:
270 mA/Approx. 12.95 W*
* Maximum power consumption
on the camera power input side.
SF R 611L
SF N 611L
DC 12 V:
690 mA/Approx. 8.2 W
PoE DC 48 V:
200 mA/Approx. 9.4 W
Operating environment
Ambient operating temperature:
Ambient operating humidity:
–45 °C to +50 °C
{–49 °F to 122 °F}
(Power On range: –30 °C to +50 °C
{22 °F to 122 °F})
20 % to 90 % (no condensation)
–10 °C to +50 °C
{14 °F to 122 °F}
(Power On range: –10 °C to +50 °C
{14 °F to 122 °F})
20 % to 90 % (no condensation)
Storage environment
Storage temperature:
Storage humidity:
–30 °C to +60 °C {–22 °F to 140 °F}
20 % to 95 % (no condensation)
Monitor output (for adjust-
ment):
VBS: 1.0 V [p-p]/75 Ω, composite, ø3.5 mm mini jack (monaural)
An NTSC or PAL signal can be outputted from camera
(use the selector switch or software to select either NTSC or
PAL signal).
MONITOR OUT conversion plug included
(ø3.5 mini-jack
RCA jack)
External I/O terminals: ALARM IN 1 (DAY/NIGHT IN) (x1)
ALARM IN 2 (ALARM OUT) (x1)
ALARM IN 3 (AUX OUT) (x1)
Microphone/line input: ø3.5 mm monaural mini jack
Input impedance: Approx. 2 kΩ (unbalanced)
For microphone input: Recommended applicable microphone: Plug-in power type
Supply voltage: 2.5 V ±0.5 V
Recommended sensitivity of microphone: –48 dB±3 dB
(0 dB=1 V/Pa, 1 kHz)
For line input: Input level: Approx. –10 dBV
Audio output: ø3.5 mm stereo mini jack (monaural output)
Output impedance: Approx. 600 Ω (unbalanced)
Output level: –20 dBV
Specifications