J
Julian MaloneSep 13, 2025
Why are Panasonic WV-SFR631L Security Camera images displayed blurry?
- DDerrick DavisSep 13, 2025
If the images are displayed blurry on your Panasonic Security Camera, check if the focus is adjusted correctly.
To Next PageTo Next PageWhy are Panasonic WV-SFR631L Security Camera images displayed blurry?
If the images are displayed blurry on your Panasonic Security Camera, check if the focus is adjusted correctly.
Why Panasonic Security Camera images are displayed washed out?
If the images are displayed washed out on your Panasonic Security Camera, check if the brightness setting is at an appropriate level. Try clicking the [Normal] button of [Brightness].
How to fix H.264 images are not displayed Panasonic WV-SFR631L?
If H.264 images are not displayed for your Panasonic Security Camera, and “Network Camera View 4S” was deleted from a PC with both “Network Camera View 3” and “Network Camera View 4” installed, delete “Network Camera View 3” from the PC and then install “Network Camera View 4S”.
General| Camera Type | Dome |
|---|---|
| Resolution | 1920 x 1080 |
| Frame Rate | Up to 30 fps |
| IR LED | Yes |
| IR Distance | 30m |
| Wide Dynamic Range (WDR) | Yes |
| Network Interface | 10Base-T / 100Base-TX |
| Ingress Protection | IP66 |
| Vandal Resistance | IK10 |
| Video Compression | H.264, MJPEG |
| Day/Night Function | Yes |
| Audio | Yes |
| Audio Compression | G.726 |
| Network Protocols | IPv4, IPv6, TCP/IP, HTTP, HTTPS, FTP, SMTP, DHCP, DNS, SNMP |
| SD Card Slot | Yes, SD/SDHC/SDXC Memory Card |
| Power Supply | PoE (IEEE802.3af) |
| Power Consumption | 6.5 W |
| Image Sensor | 1/3 type MOS image sensor |
