EasyManua.ls Logo

Panasonic WV-SPW631LT - User Manual

Panasonic WV-SPW631LT
226 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Operating Instructions
Network Camera
Model No. WV-SPW631LT/WV-SPW631L
WV-SPW611L/WV-SPW611
WV-SPW631L
W
V
S- P
W
6
3
1
L
Before attempting to connect or operate this product, please read these instructions
carefully and save this manual for future use.
The model number is abbreviated in some descriptions in this manual.

Table of Contents

Other manuals for Panasonic WV-SPW631LT

Preview: Installation Guide
Installation Guide48 pages
Preview: Quick Start Guide
Quick Start Guide2 pages

Questions and Answers

  • A
    Alexander LoweryAug 8, 2025
    What to do if my Panasonic Security Camera power is not turned on?
    • J
      Justin BarrettAug 8, 2025
      If your Panasonic Security Camera isn't powering on when using a DC power supply, ensure the 12 V DC power supply is correctly connected to the 2P power supply cable. Verify the connection is properly established. If you're using a PoE device, confirm the camera's network cable and the PoE device are connected with a LAN cable and that the connection is also properly established. Also, the power supply might stop if the power demanded exceeds the PoE device's limit. Consult the PoE device's operating instructions.
  • M
    Mr. Dale LeeNov 23, 2025
    How to fix Panasonic WV-SPW631LT when cannot access from the web browser?
    • S
      Sean HawkinsNov 23, 2025
      If you cannot access the Panasonic Security Camera from the web browser, here are several things to check: * Ensure the LAN cable is firmly connected. * Verify the link indicator is lit, and check for cable or wiring issues. * Confirm the camera's power is on. * Validate the IP addresses and check for conflicts with other devices. * Ensure you're using the correct IP address by using the Windows command prompt to ping the camera's IP address. * If using HTTPS, access with “https://” and the correct port number. * Make sure the default gateway or DNS server address is correctly set in the network settings. * If the router doesn't support UPnP, enable port forwarding. * Log into “Viewnetcam.com” to check registered camera information. * Check the URL for correctness. * ...

Summary

1 Monitor images on a PC

3 Record images on the SD memory card manually

4 Action at an alarm occurrence

7 Playback of images on the SD memory card

8 About the network security

8.1 Equipped security functions

Details the security features like access restrictions by host/user authentication and HTTPS.

9 Display the setup menu from a PC

10 Configure the basic settings of the camera [Basic]

10.1 Configure the basic settings [Basic]

Covers basic settings like camera title, time/date, language, and SD card/log configurations.

10.2 Configure the Internet settings [Internet]

Details settings for UPnP, DDNS, and general internet connectivity.

10.3 Configure the settings relating to the SD memory card [SD memory card]

Instructions for configuring SD memory card settings, including security and recording modes.

11 Configure the settings relating to images and audio [Image;Audio]

11.1 Configure the settings relating to the image capture mode [JPEG;H.264]

Covers selection of image capture modes, resolution, and frame rate for JPEG and H.264.

11.3 Configure the settings relating to H.264 images [JPEG;H.264]

Detailed configuration options for H.264 image transmission, including bit rate and quality.

11.5 Adjust the zoom and focus

Instructions for adjusting the camera's zoom ratio and focus manually or automatically.

12 Configure the multi-screen settings [Multi-screen]

13 Configure the alarm settings [Alarm]

13.1 Configure the settings relating to the alarm action [Alarm]

Covers configuration of terminal inputs, alarm outputs, and command/audio detection alarms.

13.5 Configure the VMD settings [VMD area]

13.6 Configure the settings relating to the audio detection [Audio detection]

13.7 Configuration of the settings relating to alarm notification [Notification]

14 Configure the settings related to advanced view [Advanced view]

14.1 Configure the settings relating to cropping [Cropping]

15 Configure the settings relating to the authentication [User mng.]

15.1 Configure the settings relating to the user authentication [User auth.]

Manages user accounts, passwords, and access levels for camera operations.

15.2 Configure the settings relating to the host authentication [Host auth.]

16 Configuring the network settings [Network]

16.1 Configure the network settings [Network]

Basic network configuration including IP address, subnet mask, gateway, and DNS.

16.2 Configure advanced network settings [Advanced]

16.3 How to configure HTTPS settings

16.4 Access the camera using the HTTPS protocol

17 Configure the settings relating to the schedules [Schedule]

17.1 How to set the schedules

18 Maintenance of the camera [Maintenance]

18.1 Check the system log [System log]

18.2 Upgrade the firmware [Upgrade]

Guide on how to check and upgrade the camera's firmware to the latest version.

18.4 Reset the settings;Reboot the camera [Default reset]

Procedures for resetting camera settings to default or rebooting the device.

18.5 Settings data;backing up or restoring logs [Data]

21 Troubleshooting

Panasonic WV-SPW631LT Specifications

General IconGeneral
Maximum Resolution1920 x 1080
Optical Zoom3.6x
IR LEDYes
Video CompressionH.264, JPEG
Network Interface10Base-T / 100Base-TX
Weather ResistanceYes
Ingress ProtectionIP66
Vandal ResistanceIK10
ONVIF ComplianceYes
Lens Focal Length2.8 mm to 10 mm
Day/Night FunctionalityYes
IR RangeUp to 30 m
Audio SupportYes
Power SupplyPoE (IEEE802.3af compliant)
Operating Temperature-40°C to +50°C
Image Sensor1/3" MOS Sensor

Related product manuals