Panasonic WV-V2530LK - Image Adjustment

8
4 Digital Zoom

When the video is in the original status, click it you can
select any zone to zoom in. In the non-original status, you
can drag the zoom-in zone in specified range. Right click
mouse to restore previous status.
 Click it; you can use the middle button of the mouse to
zoom in/out the video size.
5 Image Adjustment
You can adjust image quality.
6 Alarm
It moves to an alarm setting screen.
7 Playback It moves to a playback screen.
(WV-V2530LK, WV-V2530L1, WV-V1330L1)
8 Logout
Click Logout button, system goes back to log in interface.
Image Adjustment 2.3.1
Click Image Adjustment button to open picture setup interface. See Figure 2-9. This interface is
displayed under a display of Image Adjustment.
Figure 2-9
Please refer to the following sheet for detailed information.
Parameter Function
Video
setup
It is to adjust monitor video
brightness.
Note:
 All the operations here apply
to WEB end only.
 Please go to Setup ->
Image/Audio or Image ->
Image adjust to adjust
corresponding items.
It is to adjust monitor video
contrast.
It is to adjust monitor video
hue.
It is to adjust monitor video
saturation.