Start time &
date
End time &
date
You can set “Start time & date” and “End time & date” for Summer
time(daylight saving).
Camera
title/Time on
screen
( Image/Audio or Image-> Image/Audio or Image ->Overlay)
Language
You can select the language from the dropdown list.
Video
Standard
This is to display video standard such as NTSC/PAL.
If this is changed, the camera reboots automatically.
NTP Setup You can check the box to enable NTP function.
NTP Server You can set the time server address.
NTP Port It is to set the time server port.
Update
period
It is to set the sync periods between the device and the time server.
6.2 Image/Audio
Image/Audio 6.2.1
Image 6.2.1.1
The video bit stream interface is shown as below. See Figure 6-2.
Figure 6-2
To Next Page
Loading...
