12
Operating procedures
w Volume adjustment
Select a proper sound level by pressing the [+] or [–] button.
w Communications with
customers (TALK)
Any store personnel wearing the headset can communicate
bidirectionally with any customer who is at the menu board.
p You will hear a beep in the headset when a vehicle
arrives at the menu board.
When the Press-To-Talk (PTT) mode is preset
Hold down the [T1] button.
p A beep is heard from the earphone to confirm that
communication has been established. In this state,
you can talk with a customer at the menu board by
speaking into the microphone of this product.
Release the [T1] button.
p Communication is interrupted and the conversation
is ended.
When the Talk-Lock mode is preset
Press the [T1] button.
p A beep is heard from the earphone to confirm that
communication has been established. In this state,
you can talk with a customer at the menu board by
speaking into the microphone of this product.
Press the [T1] button again.
p Communication is interrupted and the conversation
is ended.
w Communications with other
store personnel (PAGE)
Store personnel wearing the headset can communicate with
each other without being heard by customers.
When the Press-To-Page (PTP) mode is preset
Hold down the [P] button.
p A beep is heard from the earphone to confirm that
communication has been established. In this state,
you can talk with a store personnel by speaking into
the microphone of this product.
Release the [P] button.
p Communication is interrupted and the conversation
is ended.
When the Page-Lock mode is preset
Press the [P] button.
p A beep is heard from the earphone to confirm that
communication has been established. In this state,
you can talk with a store personnel by speaking into
the microphone of this product.
Press the [P] button again.
p Communication is interrupted and the conversation
is ended.
To Next Page
Loading...
