23
English
Table of beep tones
This product conveys the messages in the table below to the user using different beep tones.
Category Message Beep tone
*1
Customer notification
Lane A BEE (at intervals of 2 seconds or so)
Lane B BU-BU (at intervals of 2 seconds or so)
System notification
*2
Mode change
(Start of speed team operation)
BU-BUU
Message recording
*2
Message recording start BUU
Message recording end BU-BU
Message recording end countdown BUU-BUU-BUU-BEE
Talk & page
Communication establishment
(Talk start, page start, alert notification)
BEE
Communication end
(Talk end, page end)
BUU
In-range notification tone
(When the status in which communication with the
Center Module is enabled has been established
from the out-of-range status)
BE-BEE
Communication error
(When talking, paging, etc. is not possible)
BU-BU-BU-BU
Volume adjustment
Volume level up BEE
Volume level up (upper limit) BE-BEE
Volume level down BUU
Volume level down (lower limit) BU-BU
Other
Error occurrence BUU-UU-UU
Remaining battery level warning BUU-UU (at intervals of 5 seconds or so)
*1 Some tones may sound the same but their intervals or speed may differ.
*2 For further details of the functions, refer to the operating instructions of the Center Module.
To Next Page
Loading...
