15
Setting the unit
w Manager mode
p The manager can interrupt store personnel’s TALK or
PAGE at any time by monopolizing one channel by
priority.
p Only 1 unit of this product or the Belt Pack (or the Order
Taker) can be set to manager mode. Complete ID
Registration, to do this setting.
Hold down the [POWER] button for 2 seconds
or more to turn off the headset.
Press the [POWER] button for 1 second or
more while holding down the [R] and [T1]
buttons to turn on the power.
p You can hear “Connecting Center Module A” and
power indicator turns red and green alternately. Also
the lane indicator blinks orange.
In dual lane operation
Settings for Lane B must also be performed.
Press the [POWER] button for 1 second or
more while holding down the [R] and [T2]
buttons to turn on the power.
p You can hear “Connecting Center Module B” and
power indicator turns red and green alternately. Also
the lane indicator blinks green.
If manager mode setting is successful, you can
hear “Manager” and the power indicator blinks
green.
p If there is a problem setting the manager mode
settings, an error beep and the voice message
“Failed” are heard from the earphone, and the
power indicator blinks red to alert the user the
abnormal state. If that happens, retry from step 1.
p Only 1 unit of this product or the Belt Pack (or the
Order Taker) can be set to manager mode per
lane. If a second unit is set to manager mode, the
manager mode setting on the first unit is automatically
cancelled.
Note
w Canceling the manager mode
Turn off the headset that has been set for the
manager mode.
Press the [POWER] button for 1 second or
more while holding down the [R] and [T1]
buttons to turn on the power.
p You can hear “Connecting Center Module A” and
power indicator turns red and green alternately. Also
the lane indicator blinks orange.
In dual lane operation
Canceling of the manager mode should be performed.
Press the [POWER] button for 1 second or
more while holding down the [R] and [T2]
buttons to turn on the power.
p You can hear “Connecting Center Module B” and
power indicator turns red and green alternately. Also
the lane indicator blinks green.
When manager mode is cancelled, the unit
returns to the normal condition, and the power
indicator turns green.
p If there is a problem canceling the manager mode
settings, an error beep and the voice message
“Failed” are heard from the earphone, and the
power indicator blinks red to alert the user the
abnormal state. If that happens, retry from step 1.
English
To Next Page
Loading...
