Panasonic WX-LT350 - Muting

18
If you want to temporarily stop the audio transmitted from this microphone to the receiver for
one reason or another, without turning off the microphone, you can temporarily mute the audio
signals.
1
Press the [PWR/MUTE] button.
When pressing the[PWR/MUTE] button once, the [OWN] selection indicator starts blinking
and the audio transmitted from the microphone to the receiver is muted. While muting is
activated, audio input of the [OWN] microphone (audio input from microphone opening,
external input and microphone input terminal) is muted. To cancel muting, press the
[PWR/MUTE] button again.
Note:
• After muting is maintained for approx. 5 minutes, the microphone is turned off automatical-
ly.
• In the muted state, volume control of the [OWN] microphone is disabled, but [OTHER] and
[LINE] are enabled.
• The muting operation may become disabled under certain circumstances. (☞ page 12)
Muting
WX-LT350
CHG
PWR
F
BATT
S
E
L
E
C
T
O
W
N
O
T
H
E
R
L
I
N
E
M
U
T
E
[OWN] selection indicator
1 [PWR/MUTE] button