Panda-Audio Future Impact v3 - MIDI Controllers as Flexi Controller Sources and Range Controls

MIDI Controllers as Flexi Controller Sources and Range Controls
If, when selecting a Flexi source or a Range Control, you choose a MIDI controller that
has a default assignment in the FI, then that default assignment will be overridden.
The default assignments and their respective default values are shown below:
MIDI CC / Name
Default Assignment in the FI
Default Value
1
Pitch/filter vibrato
0 /127
12
2
3rd (logarithmic) VCF volume of Main Mixer
127
5
Portamento time
0 /127
13
7
Main output volume
127
11
Filter cutoff
64
64
Sustain
0
65
Portamento ON/OFF
127
66
FI ON/OFF
---
67
Program decrement
---
69
FI ON/OFF toggle
---
74
Filter cutoff
64
Pitch Bend
Pitch bend
---
Aftertouch
Aftertouch
---
Velocity
Keyboard velocity control of filter cutoff in MIDI mode
---
The default values are recalled (all of them at once) when one of the following occurs:
1. The FI is powered on;
2. The Editor changes one of the Flexi sources;
3. A Program Change.
13
EWI Mode only.
12
Synth Mode only.
Go to Table of Contents
67