33
5. On the DPF:
On the
FrameIt screen, be sure the Status changed from Setup Required to
Registered, and then select Connect.
6. If applicable, repeat steps 3-5, selecting
Get Claim Token 2 to connect with your
second FrameIt account.
7. The
FrameIt screen will be displayed with the RSS feed collection folders you’ve set
up.
TIP: If you make changes to your Windows Live FrameIt account while your DPF is
connected (i.e., create new collections), the new feed data will not display until you
disconnect and re-connect with FrameIt.
Photo Sharing Websites
The DPF can connect wirelessly to popular online photo sharing websites to which you have
uploaded your photos, allowing you to view the uploaded photos directly through the DPF.
Establish Accounts with Photo Sharing Websites
The online photo sharing websites that the DPF can access vary depending on the DPF models,
and could change without notice. Follow these steps to determine which sites are available with
your DPF:
1. After completing the initial wireless network setup (page 30), on the HOME screen,
select
Wi-Fi.
2. On the
Photo Sharing screen, select the desired photo sharing site to which you want to
connect.
3. Follow the on-screen instructions for accessing the photo sharing websites for establishing
your account(s).
Connect DPF with Photo Sharing Websites
1. After establishing accounts with the online photo sharing websites (per instructions
above), on the
HOME screen, select Wi-Fi.
2. Select the
User Settings button associated with the desired online photo sharing
website.
3. Select
User ID 1 or 2, and then use the virtual keyboard to enter your photo sharing
account
User ID.
4. Select
Done.
5. Select
Password 1 or 2, and then use the virtual keyboard to enter your photo sharing
account
Password.
TIP: The ID and password are case sensitive; if the ‘Connected failed, please
check ID and Password’ message appears, you may need to re-enter them
being careful to use the appropriate upper/lower case characters.
6. Select
Done on the Virtual Keyboard screen.
7. Select
Connect on the photo sharing setup screen.
8. The
Photo Sharing screen will be displayed; the status of the photo sharing website
should change from
Setup Required to Setup Done.
9. When you are successfully connected, the albums or collection folders you created in
your photo sharing account will be displayed.
To Next Page
Loading...
Need help?
General
