15
Notes:
Do not remove the memory card or disconnect the power
supply while the indicators are blinking.
This scanner only supports output images in JPEG (.jpg)
format, and the date/ time attribute will not be added.
For more information on how this scanner stores the
scanned image files on the memory card, refer to
“Orientation” on page 12.
If the memory card is near full (lower than 1MB), the
Status/Card indicator blinks (refer to “Indicator Lights” on
page 9). Use another card or delete some files on it if
necessary.
To power down the scanner after all originals
are scanned, press and hold the power button
for one second. The power indicator will blink
and then go off.
Now you can safely disconnect the power and
remove the memory card from the scanner.
Note: The scanner will automatically power off if it’s left idle for
15 minutes (if not connected to the PC).
AutomaticImageCropping
The PhotoLink Scanner has a built-in cropping
function that detects and crops dark edges of an original
during the scan process (see illustration below).
To Next Page
Loading...
Need help?
General
