To Next Page
A
Aaron HernandezSep 6, 2025
How to fix an EEPROM Error on Panduit PTR3E?
- TthomashernandezSep 6, 2025
To resolve an EEPROM Error indicated by the LED and LCD message on your Panduit Printer, cycle the power off and on.
How to fix an EEPROM Error on Panduit PTR3E?
To resolve an EEPROM Error indicated by the LED and LCD message on your Panduit Printer, cycle the power off and on.
What to do if my Panduit PTR3E does not respond and shows a 'Device Fault' error?
If your Panduit Printer is displaying a 'Device Fault' error and is not responding, verify that both ends of the cable are securely inserted into their respective connectors. Also, ensure the printer is online and the cable isn't defective.
How to fix a PARITY ERROR on Panduit PTR3E?
To resolve a PARITY ERROR indicated by the LED and LCD message on your Panduit Printer, cycle the power off and on.
How to fix a Cutter Error on Panduit PTR3E Printer?
To resolve a Cutter Error indicated by the LED and LCD message on your Panduit Printer, cycle the power off and on.
How to fix a Sensor Error on Panduit PTR3E?
To resolve a Sensor Error indicated by the LED and LCD message on your Panduit Printer, cycle the power off and on.
How to fix a Head Error on Panduit Printer?
To resolve a Head Error indicated by the LED and LCD message on your Panduit Printer, cycle the power off and on.
How to fix a Machine Error on Panduit PTR3E?
To resolve a Machine Error indicated by the LED and LCD message on your Panduit Printer, cycle the power off and on.
What causes a 'framing error' message on Panduit Printer?
A 'framing error' message on your Panduit Printer may be caused by inconsistencies with the Baud Rate, Parity, Data Bits, or Stop Bits in relation to your host computer. To fix this, choose the Panduit defaults (all DIP switches in the OFF position) to achieve 9600 baud, no parity, 8 databits, and 1 stop bit.
What to do if my Panduit PTR3E Printer shows a Framing Error?
If your Panduit Printer indicates a Framing Error, cycle the power off and on.
What to do if the LABEL and RIBBON lights are on in my Panduit Printer?
If both the LABEL and RIBBON lights are illuminated on your Panduit Printer, it could mean that the labels or ribbons are incorrectly loaded. Make sure that the labels and ribbons are loaded correctly.
Step-by-step instructions for correctly loading various types of labels into the printer.
Detailed procedure for installing the ribbon correctly for thermal transfer printing.
Details on setting printer parameters using DIP switches on the front panel and serial adapter.
How to manually adjust printer settings like print darkness, speed, and pitch using the LCD panel.
Instructions and supplies needed for cleaning the printer's critical printing components.
Step-by-step guide for safely removing and installing a new print head.
A table detailing LED indicators, LCD messages, and audible beeps for error conditions.
General
