SMARTZONE G5 INSTALLATION MANUAL
Section 2 – Installing the PDU
Vertical PDUs
Panduit Vertical PDUs include the following form factors: half-height, mid-height, and
full-height models. This section covers the recommended installation methods.
Install Mounting Hardware
Each vertical PDU has two different mounting hole locations on the sides and back of
the PDU for the button installation to assist with mounting in a non-Panduit racks. When
installing the mounting buttons, use either mounting holes as a set.
Mounting button installation – outlets facing the center of the rack
1. Align and install the mounting buttons with the screw holes on the face, opposite
of the receptacles.
2. Install the PDU by inserting the mounting buttons into the keyhole slots on the
PDU mounting bracket in the rack.
Mounting button installation – outlets facing the back or front of the rack
1. Align and install the mounting buttons with the screw holes on the sides of the
PDU.
1. Install the PDU by inserting the mounting buttons into the keyhole slots on the PDU
mounting bracket in the rack.
To Next Page
Loading...
