SMARTZONE G5 INSTALLATION MANUAL
Features
The Panduit Monitored, Switched, Monitored per Outlet, and Monitored & Switched
PDUs provide the following features:
Lower profile on Vertical PDUs – enhances serviceability area in the back of
the rack.
Multiple mounting options on Vertical PDUs – can be mounted with outlets
facing in toward center of rack, back or front of rack.
Higher operating temperature – all G5 series PDUs rated for 60˚C operating
temperature.
Colored receptacles – used to easily differentiate load segments and phases
Integrated cord retention on all C13 & C19 receptacles – eliminates cord
retention brackets.
Supports optional locking cords on all C13 & C19 receptacles – eliminates
the need to use tie wraps on both ends of the power cord connection
1U PDUs support multiple mounting options – can be mounted horizontal in a
U space or in the True 0U space between the RETMA rails.
Hot Swappable Network Management Module – allows power distribution
during module replacement eliminating downtime.
1Gb Ethernet – eliminates the need to use older network switches.
Daisy Chain – able to network up to four of the same PDUs on one IP address.
Enhanced Sensor Support – supports up to six physical sensors (with optional
hub) and eight measurements per PDU with a total of 32 measurements in a
maximum daisy chain configuration.
Dual-color OLED display – improves visibility while providing local access to
view configuration settings and automatically enter sleep mode to conserve
energy.
Redundent Network Access – Using a redundant power delivery configuration
and separate network connections it provides facilities management and IT (or
Tenant) power consumption information.
High-density models – provides 24 outlets in a half-height or 48 outlets in a full-
height PDU while keeping out of the back of rack serviceability area (back of rack
keep out zone).
To Next Page
Loading...
Need help?
General
