Panduit VeriSafe AVT User Manual

© Panduit Corp. 2018
INSTRUCTION MANUAL VeriSafe AVT
B21075_00 Page: 6 of 20 04-2018
Applications
UL - Industrial Control Equipment for
Hazardous Locations
Suitable Equivalency
Area Classification -
Class I, Division 2
Groups A, B, C, D
Temperature Classification - T3
Area Classification -
Class I, Zone 2
Group IIA, IIB, IIC
Temperature Classification - T3
Electrical System
For use in 1 and 3-phase AC systems
Voltage Detection Range
Up to 600V AC (50/60Hz), 600V DC; Rated tolerance +10%
Absence of Voltage Threshold
3 V (See the Installation Considerations section for additional information)
Overvoltage Category
III (600 V)
Degree of Protection*
Indicator Module: For Flat Surface Mounting in a TYPE (UL, NEMA and CSA) 1, 12, 4, 4X,
13, IP66, or IP67 Enclosure
Isolation Module: Open Type, IP20
*Degree of protection specified is related to the Indicator Module only. To meet the TYPE (UL, NEMA and CSA) 1, 12, 4, 4X, 13, IP66 or IP67
requirements, mount on a flat surface of an enclosure meeting the appropriate UL TYPE or NEMA rating. Verify that the seal and o-rings are
clean to ensure proper sealing.
Environment
Operating Temperature
0°C to 60°C (32°F to 140°F)
Storage Temperature
-45°C to 85°C (-49°F to 185°F)
Humidity
5 to 90% non-condensing; Rated 80% at 40°C, decreasing linearly to 50% at 60°C
Pollution Degree
3
Altitude
Up to 2000 meters (1.24 miles)
Battery
Type
Industrial 3.6V Lithium AA, see table in Maintenance section for list of compatible batteries.
Functional Safety
Mode of operation
Continuous, High Demand
Failure Rate
ʎSD
ʎSU
ʎDD
ʎDU
SFF
65
371
152
10
98.3%
Supported Safety Integrity
Levels
SIL3
Demand Response Time
10.1 Seconds
Device Type
Type A
Systematic Capability
SC 3
Error Handling Response Time
10.3 Seconds
Reference Report
PAN 16/01-050 R003
Operating Modes
SIL mode only

Panduit VeriSafe AVT Specifications

General

Brand	Panduit
Model	VeriSafe AVT
Category	Test Equipment
Language	English