Panduit VeriSafe AVT User Manual

© Panduit Corp. 2018
INSTRUCTION MANUAL VeriSafe AVT
B21075_00 Page: 5 of 20 04-2018
Technical Specifications
Warning: Do not use this product outside of the specified performance and environmental
limits. Failure to comply with these specifications could result in product failure, personal injury, or
death.
Standards
UL 1436 Standard for outlet circuit testers and similar indicating devices
CAN/CSA-C22.2 No. 160
Voltage and Polarity Testers
IEC / UL / CSA C22.2 NO. 61010-1
Safety requirements for electrical equipment for measurement, control,
and laboratory use – Part 1: General Requirements
IEC / UL / CSA C22.2 NO. 61010-2-030
Safety requirements for electrical equipment for measurement, control,
and laboratory use – Part 2-030: Particular requirements for testing and measuring circuits
UL 508 & CSA-C22.2 No. 14 Industrial control equipment
IEC 61508-1, -2, and -3 {SIL 3 Rating}
Safety of Electrical/Electronic/programmable Electronic safety-related security systems –
Part 1 General Requirements
Part 2 Requirements for Electrical / Electronic / Programmable safety related systems
Part 3 Software Requirements
FCC - CFR 47 Part 15 Subpart B
Radio frequency devices
IEC 61326-1, -3-1, -3-1: corr 1
EN 61326-1, -3-1
Electrical equipment for measurement, control and laboratory use-EMC requirements - Part 1
Part 3-1: Immunity requirements for safety-related systems and for equipment intended to
perform safety-related functions (functional safety) - General industrial applications including
corrigendum 1
EN 55011, CISPR 11
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics -
Limits and methods of measurement
IEC / EN61000-3-2
IEC / EN61000-3-3
Electromagnetic compatibility (EMC) - Part 3-2: Limits — Limits for harmonic current emissions
(equipment input current ≤ 16 A per phase)
KN 61000-6-2
KN 61000-6-4
In an industrial environment, General immunity Test Method
Preventing interference in industrial environments, Test Method
EN 61000-6-2
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial
environments
ISA 12.12.01
Nonincendive Electrical Equipment for use in Class I and II, Division 2, and Class III,
Divisions 1 and 1 Hazardous (Classified) Locations
CSA C22.2 NO. 213
Nonincendive Electrical Equipment for use in Class I and II, Division 2, and Class III,
Divisions 1 and 1 Hazardous (Classified) Locations
AS/NZS CISPR 11 Australian / New Zealand Standard - Industrial, scientific and medical equipment—Radio-
frequency disturbance characteristics—Limits and methods of measurement
CAN - ICES-001
Industrial, Scientific and Medical (ISM) radio frequency generators.
CE
Conformity Marking for European Economic Area
RoHS
Restriction of hazardous substances
NOTE: By design and installation guidelines the VeriSafe AVT is not impacted by the occurrence of phenomena from IEC 61000-4-16

Panduit VeriSafe AVT Specifications

General

Brand	Panduit
Model	VeriSafe AVT
Category	Test Equipment
Language	English