EasyManua.ls Logo

Pantech Laser - Managing Calls and Conferences

Pantech Laser
91 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
32
Increasing or decreasing the brightness
1. Tap Set .
2. Adjust the brightness by scrolling left or right.
Zoom in and out
1. Tap Set .
2. Adjust the zoom level by scrolling up and down.
It ranges from 1x to 4x.
Starting the recording
1. Tap Record 2.
Stopping or ending video share
1. Tap Stop to end the video share.
2. It will ask you if you would like to stop video share > Yes to
stop.
note: Even you end video share, the call will not be ended. Press to
end the call. The recorded video will be saved in My Stuff > Video.
Receiving video share
1. After receiving video share, it will ask you whether to accept
or reject the video share > Yes to accept and No to reject.
2. Tap to enlarge the video to fill the entire screen.
Options during a call
Microphone off and on
Switching your phones microphone off
1. Tap Mute .
Switching your phones microphone back on
1. Tap Mute
K
.
Talking on speaker
1. Tap Speaker .
Putting a call on hold and returning
Putting a call on hold
1. Tap Hold or press .
Returning to a held call
1. Tap Hold or press again.
Multi-party calls
N
You can talk with more than one person or have conference call.
Making a multi-party call
1. Call the first participant.
2.
Call the second participant. The first call is automatically put on hold.

Other manuals for Pantech Laser

Related product manuals