Pantum M6500 series User Manual

39
8. Select “Yes, I want to configurate the printer's wireless network” on the wireless setup window
popped out, and operate according to the prompts to set up the printer to wireless network
(please refer to Chapter 5.1.1 for setup method).
9. The installation software will search the printer automatically after wireless network is
configured successfully. The search process may need some time.
10. Select the printer needs to be connected and click “Next”.
Note:
• If the printer you need to connect is not in the list of printers searched, please click
“Refresh” to search again.
• When the printer IP address changes under printer driver installed with host ID , you
can also directly print without re-installing the driver. If you need to install the printer
driver with the host ID, please check the option "Install the printer in the list with host
ID".
• If IP address or host name is added manually, you need to know the IP address of the
printer connected or host name. If they are not made clear, please print the “NetConf
Pg” and view “IP Address” and “Host name” (Please refer to Chapter 7.4).

Pantum M6500 series Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Processor Speed	600 MHz
Memory	128 MB
Input Capacity	150 sheets
Output Capacity	100 sheets
Functions	Print
Supported Operating Systems	Windows, Mac OS, Linux
Print Speed	22 ppm (A4)
First Print Out Time	Less than 7.8 seconds
Recommended Monthly Volume	2, 000 pages
Connectivity	USB 2.0
Supported Media Sizes	A4, A5, A6, B5, Postcard
Media Types	Plain, Thick, Thin, Label, Cardstock, Envelope