Pantum M6500 series User Manual

84
9.4.8.Manual dual-side
If the original document is copied on both sides manually, please select ADF feeding mode.
The manual dual-side includes 2 modes:
Closed: supporting single side copying.
Open:
9.4.9.Paper setting
By paper setting, you can set suitable paper dimension and type.
Paper dimension: A4, Letter, B5, A5, A6, Executive, Legal and Folio.
Paper type: common paper, thick paper, envelope paper, film paper, card paper, tagboard and
thin paper.
Note:
• After “multipage” and “clone function” are set, “paper dimension” supports “A4” and
“Letter” only.
• If original documents are copied with ADF mode, “paper dimension” supports
“common paper” only.
9.5. ID card copying setting
Change relevant setting with “copying setting menu” for better copying effect.
1. Press “ID card copying key” on control panel and then press “OK key” to enter “copying setting”
interface.
2. Press “direction key” to select options and then press “OK key” to enter setting interface.
3. Press “direction key to select option to be set and press “OK key” to set option.

Pantum M6500 series Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Processor Speed	600 MHz
Memory	128 MB
Input Capacity	150 sheets
Output Capacity	100 sheets
Functions	Print
Supported Operating Systems	Windows, Mac OS, Linux
Print Speed	22 ppm (A4)
First Print Out Time	Less than 7.8 seconds
Recommended Monthly Volume	2, 000 pages
Connectivity	USB 2.0
Supported Media Sizes	A4, A5, A6, B5, Postcard
Media Types	Plain, Thick, Thin, Label, Cardstock, Envelope