Pantum M6500 series User Manual

64
7.1.4. Sleep Time Setting
Set the Sleep Mode to lower the power consumption. Sleep Time Setting allows you to select the
idle time before the device enter into Sleep Mode. The default idle time is 1 minute.
1) Press "Menu" button to enter the menu interface.
2) Press direction pad "▲" or "▼" to select "System Setting" and press OK button.
3) Press direction key "▲" or "▼" to select "Sleep time set" option, and press "OK" key to set the
corresponding sleep time.
M6200/M6500/M6550 Series
M6600 Series
Note:
• When the printer is in dormant status, you can wake it up just by pressing Power
Saving button, sending print/scan/Fax task, or opening or closing the output bin.

Pantum M6500 series Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Processor Speed	600 MHz
Memory	128 MB
Input Capacity	150 sheets
Output Capacity	100 sheets
Functions	Print
Supported Operating Systems	Windows, Mac OS, Linux
Print Speed	22 ppm (A4)
First Print Out Time	Less than 7.8 seconds
Recommended Monthly Volume	2, 000 pages
Connectivity	USB 2.0
Supported Media Sizes	A4, A5, A6, B5, Postcard
Media Types	Plain, Thick, Thin, Label, Cardstock, Envelope