Pantum M6500 series User Manual

9
1.6. Control Panel
M6200/M6500/M6550 Series
1
Wi-Fi button
Short press Wi-Fi button to turn on direct Wi-Fi connection of the printer
and automatically print out "Mobile Device Wi-Fi Connection Wizard"
page (for models with Wi-Fi function only).
Long press Wi-Fi button for over 2s to start WPS when Wi-Fi is not
connected or to disconnect Wi-Fi when it has already been connected
(for models with Wi-Fi function only).
Open save toner function(applicable to non-Wi-Fi model only).
2
Power
Saving/Wake-up
Button
Press this button to switch to power saving status or wake the machine
from power saving status
3
Status Light
This light indicates the ready, alarm and other status of the printer
Green light: Normal
Orange light: Warning
Red Light: Error
4
Scan Button
Press this button to enter into scan mode
5
Copy Button
Press this button to enter into copy mode
6
ID Card Copy Button
Press this button to enter into ID Card Copy mode
7
Bill Copy Button
Press this button to enter into Bill Copy mode
8
Menu Button
Press this button to access the menu options to make the settings
9
Back Button
Press this button to go back to the upper-level page
10
Cancel Button
Press this button to cancel the operation

Pantum M6500 series Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Processor Speed	600 MHz
Memory	128 MB
Input Capacity	150 sheets
Output Capacity	100 sheets
Functions	Print
Supported Operating Systems	Windows, Mac OS, Linux
Print Speed	22 ppm (A4)
First Print Out Time	Less than 7.8 seconds
Recommended Monthly Volume	2, 000 pages
Connectivity	USB 2.0
Supported Media Sizes	A4, A5, A6, B5, Postcard
Media Types	Plain, Thick, Thin, Label, Cardstock, Envelope