Pantum M6500 series User Manual

65
7.1.5. Auto shut-off setting
"Auto shut-off setting" to set off condition and off delay of printer.
1) Press "Menu" button to enter the menu interface.
2) Press direction pad "▲" or "▼" to select "System Setting" and press OK button.
3) Press direction key "▲"or "▼" to select options of "Auto off set", press "OK" to set off condition
and off delay.
M6200/M6500/M6550 Series
M6600 Series
Note:
Set auto off condition:
• Shutdown under no-port state (default configuration): no port is connected, Wi-Fi
function deactivated, printer is under standby or sleep mode.
• Shutdown under idle state: the printer is under standby or sleep mode.
• If auto off condition is satisfied, printer will be off at the preset time.
• After printer is off, power consumption is 0.5W or lower.
• Individual countries (or regions) do not support auto off setting.
• Default automatic shutdown time: 10 hours

Pantum M6500 series Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Processor Speed	600 MHz
Memory	128 MB
Input Capacity	150 sheets
Output Capacity	100 sheets
Functions	Print
Supported Operating Systems	Windows, Mac OS, Linux
Print Speed	22 ppm (A4)
First Print Out Time	Less than 7.8 seconds
Recommended Monthly Volume	2, 000 pages
Connectivity	USB 2.0
Supported Media Sizes	A4, A5, A6, B5, Postcard
Media Types	Plain, Thick, Thin, Label, Cardstock, Envelope