Pantum M6500 series User Manual

10
11
Start Button
Press this button to start the corresponding operation after the operation
setting
12
OK Button
Press this button to save the setting
13
“▲” and “▼”
Press these two buttons to browse each menu and its options
M6600 Series
1
Speaker
Press this button, enter the number to dial, and then press the Start button
to Fax.
2
Redial/Pause
This button allows you to redial the last number you dialed or insert pause
when you set up speed dial or dial manually.
3
Contacts
This button allows you to dial the speed dial number directly.
4
Junk Fax
When you receive a Fax, press this button to add the currently received Fax
number to the junk Fax number list;
5
Power
Saving/Wake-up
Button
Press this button to switch to power saving status or wake the machine from
power saving status
6
Wi-Fi Button
Short press Wi-Fi button to turn on direct Wi-Fi connection of the printer and
automatically print out "Mobile Device Wi-Fi Connection Wizard" page (for
models with Wi-Fi function only).
Long press Wi-Fi button for over 2s to start WPS when Wi-Fi is not
connected or to disconnect Wi-Fi when it has already been connected (for
models with Wi-Fi function only).
Open save toner function(applicable to non-Wi-Fi model only).
7
Fax
Press this button to enter into the Fax mode.

Pantum M6500 series Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Processor Speed	600 MHz
Memory	128 MB
Input Capacity	150 sheets
Output Capacity	100 sheets
Functions	Print
Supported Operating Systems	Windows, Mac OS, Linux
Print Speed	22 ppm (A4)
First Print Out Time	Less than 7.8 seconds
Recommended Monthly Volume	2, 000 pages
Connectivity	USB 2.0
Supported Media Sizes	A4, A5, A6, B5, Postcard
Media Types	Plain, Thick, Thin, Label, Cardstock, Envelope