Pantum P2210 Series User Manual

42
5.1.1.2. Setup methods of wireless network setup tools
1. Take the wireless network setup tool in computer.
1) Windows system: Click the “Start menu” – “All programs” - “Pantum”－ Product name –
“Wireless network setup tool”.
2) macOS system: click "Go" - "Applications" - "Pantum" - "Utilities" - "Wireless Network
Configuration Tool" on the computer Finder menu bar.
2. Use USB cable to connect and configure. Select "Yes, I have an USB cable that can be used for
installation" in the following interface. Click "Next".
2.1 The computer has been connected to wireless network.
1) The currently wireless network currently connected to computer is selected as wireless network
configuration tool by default. Complete configuration according to interface prompt.
Note:
• The SSID you selected should be consistent with the SSID of access point (wireless
router) connected to your computer.

Pantum P2210 Series Specifications

General

Print Technology	Monochrome Laser
Print Resolution	1200 x 1200 dpi
Maximum Monthly Duty Cycle	15, 000 pages
Memory	128 MB
Connectivity	USB 2.0
Input Capacity	150 sheets
Output Capacity	100 sheets
Operating Systems Compatibility	Windows, Linux, MacOS
Dimensions	337 x 220 x 178 mm
Weight	4.75 kg
First Print Out Time	Less than 7.8s
Supported Media Types	Plain, Thick, Thin, Cotton, Color, Preprinted, Recycled, Bond, Label, Card, Envelope
Supported Media Sizes	A4, A5, A6, Letter, Legal, Executive
Supported Media Weight	60~163g/m²
Power Consumption	Average: 370W