Pantum P2210 Series User Manual

43
2) Please tick “No” to configure other wireless network needed to connect to. Complete
configuration according to interface prompt.
Note:
• At present, the printer supports 3 types of safe modes: none, WEP and WPA/WPA2.
1) None: There is no encryption method used.
2) WEP: Send and receive data via security key by using WEP (Wired Equivalent
Privacy). WEP key is applicable to 64-digit and 128-digit encrypted network and can
contain numbers and letters at the same time.
3) WPA/WPA2: it is the pre-shared key (PSK) of WiFi protected access which
connects wireless device and access point via TKIP or AES encryption
(WPS-Personal). The working length of WPA/WPA2 is within the PSK of 8-63
characters.
• The display password is not ticked by default; if it is ticked, all passwords input can
be seen in clear text.

Pantum P2210 Series Specifications

General

Print Technology	Monochrome Laser
Print Resolution	1200 x 1200 dpi
Maximum Monthly Duty Cycle	15, 000 pages
Memory	128 MB
Connectivity	USB 2.0
Input Capacity	150 sheets
Output Capacity	100 sheets
Operating Systems Compatibility	Windows, Linux, MacOS
Dimensions	337 x 220 x 178 mm
Weight	4.75 kg
First Print Out Time	Less than 7.8s
Supported Media Types	Plain, Thick, Thin, Cotton, Color, Preprinted, Recycled, Bond, Label, Card, Envelope
Supported Media Sizes	A4, A5, A6, Letter, Legal, Executive
Supported Media Weight	60~163g/m²
Power Consumption	Average: 370W