Pantum P3502DN

4-3
Note: • The access point (or the wireless router) must support Wi-Fi Protected Setup.
4.2.2. Setting up through Wi-Fi Conguration Tool
Wi-Fi conguration tool is a computer software that helps users to set the printer SSID,
encryption method and password. Use USB cable to connect the printer with the computer,
then launch the Pantum wireless network conguration tool on your computer and conduct
wireless network conguration on the printer.
Open the Wi-Fi conguration tool from the driver installation package. The specic steps are
as follows:
4.2.2.1. Windows System
1) Detect Wireless Network Card
Wi-Fi conguration tool can search the wireless network automatically by using a wireless card
in the computer. If the computer does not have a wireless card, the option of "Enter SSID
Manually" will be automatically ticked on the "Wireless Network List" page. Please skip to
Step 3 in this case.
2) Wireless Network List
After launching the conguration tool, the display of Network List detected by the wireless
network conguration program appears, where you can select the wireless network.