Need help?Do you have a question about the ParaBody 889 and is the answer not in the manual?
Read all warnings and instructions. Use only for intended exercise. Do not modify the machine.
Obtain a medical exam before beginning any exercise program.
Keep body and clothing free of all moving objects.
Inspect machine before use. Do not use if damaged. Do not attempt repairs.
Ensure weight pin is fully inserted; use manufacturer-provided pin.
Never pin weights or prop plates in elevated position; do not use if found like this.
Inspect cables and connections, pay attention to ends. Do not attempt repairs.
Ensure spring-loaded pull pins are fully engaged and tighten thumbscrew.
Children must not be allowed near machine; supervise teenagers.
Lists necessary tools like wrenches, sockets, allen wrench, tape measure for assembly.
Explains how to measure bolt length from the underside of the head, with a visual guide.
Comprehensive list of all parts with their respective numbers, descriptions, and quantities.
Instruction to remove four 7/16" CAP PLUGS from cross supports as shown in Figure 1.
Instructions for inserting end caps and glides into the stack base and assembling the spring pin.
Instructions for inserting end caps and non-skid strips onto the adjustable foot support.
Connects stack base and upright to lower cross support, inserts adjustable foot support.
Assembles guide rods, cushions, weight plates, head plate, and shaft collars for the weight stack.
Attaches top boom to upright and upper cross support, inserts end caps and bushings, tightens shaft collars.
Securely attaches the lat bar support to the top boom using specified hardware.
Routes cable through top boom, assembles pulleys with spacers and nuts.
Connects selector pin and cable to head plate assembly, adds pulley and side plates.
Routes 124" cable through upright, assembles pulley with bolts, spacers, washers, and nuts.
Loops cable around pulley, assembles pulley to plates, secures cable end to stack base.
Attaches grips to bars, connects bars to cables, and includes cable tension adjustment instructions.
Recommends regular cleaning with soapy water and lubrication of guide rods.
Daily inspection of equipment, tightening loose connections, and replacing worn parts.
Instructions to record model, serial number, and purchase details for warranty service.
Lifetime warranty for frame and welds against cracking or breaking.
Lifetime warranty for specific parts against defects in material or workmanship.
Three-year warranty for coated cables and upholstery against defects.
Details conditions that void warranty, such as misuse, abuse, or unauthorized repair.
Steps to follow for warranty service, including required information.
General| Brand | ParaBody |
|---|---|
| Model | 889 |
| Category | Fitness Equipment |
| Language | English |
To Next Page
