Paradox Hellas S.A. fighter - User Code Management; Editing Zone Descriptions; Performing Periodic Test

15
Fighter - Advanced Analogue Conventional Fire Alarm & Extinguishing Control Panel
——————=BYPASS=——————
>01(Z) ZONE 01
>10(R) ZONE 10
>11(Z+R) ZONE 03
Figure 15. Bypassed zones & relays information screen
Pressing • [BYP] again: The zones overview screen (Figure 16) is displayed. Each
zone is represented as one character. In the list view each zone bypass is shown
with either |(z)|: Zone bypass only, |(r)|: Relay bypass only, |(b)|: Zone and relay
bypass.
bbb
________________
____________________
____________ BYPASS
Figure 16. Bypassed zones overview screen
4.5 User’s Code (ALM2.4)
To activate user’s code:
Press • <4> to select menu item |4.User’s Code|: The user’s code settings are dis-
played to edit.
Press • <ENTER> to edit user’s code, by using the alphanumeric buttons.
Re-press • <ENTER> to accept editing and add the name of user.
Once nished press • <CLR> to exit access level 2 menu.
4.6 Zone Descriptions (ALM2.5)
To zone descriptions:
Press • <5> to select menu item |5.Zone Descriptions|: The zone description list is
displayed.
<Up> <Down>• keys to place the ashing cursor on the required zone.
Use • <ENTER> to edit zone description, by using the alphanumeric buttons.
Once nished press • <CLR> to exit access level 2 menu.
4.7 Periodic Test (ALM2.6)
To activate a periodic test:
Press • <6> to select menu item |6.Periodic Test|: The periodic test info are dis-
played.
Use • <ENTER> to verify the execution of periodic test.