Once nished press • <CLR> to exit access level 2 menu.
! PERIODIC TEST !
Next Date:01/01/2010
Test the system,
< then press enter
Figure 17. Access Level 2 Periodic Test screen
4.8 Time/Date Adj. (ALM2.7)
To activate a time / date adj.:
Press • <7> to select menu item |7.Time/Date Adj|: The time / date adj. settings are
displayed.
Use • <ENTER> to edit a selection.
Once nished press • <CLR> to exit access level 2 menu.
Date - Time Input
————————————————————
Date 01/01/10
Time 03:13
Figure 18. Οθόνη ρύθμισης Ώρας/Ημέρας
4.9 Walk Test (ALM2.8)
To activate walk test procedure:
Press • <8> to select menu item |8.Walk Test|: The walk test settings are dis-
played.
Select the walk test time out time.•
Press • <ENTER> to start walk test procedure (all the detectors of the installation
one by one).
Once nished press • <CLR> to exit access level 2 menu.
Walk test timeout
————————————————————
[060]
Seconds (10 - 300)
Figure 19. Set Walk Test cancellation time screen