Spectra LED Keypads 25
4.9 AUTO-ARMING
The Spectra alarm system can be programmed to
automatically arm upon the following two conditions.
4.9.1 Timed Auto Arming
The alarm system can automatically arm itself at a specified
time everyday. As with Regular Arming (see section 4.3), the
system will not arm if a zone is open. If this occurs, the system
will not arm until the next day. Your installer enables this option,
but you can program the time of day the system will
automatically arm.
A 60-second Exit Delay (see section 4.1) will start before
the system arms. At this point, Auto-Arming can be
cancelled by entering your access code.
4.9.2 “No Movement” Auto Arming
Your panel can be programmed to arm the system and/or send a
report if no zone activity occurs for a pre-programmed amount of
time. This is a particularly useful feature when supervising an
individual with chronic health problems or who lives alone.
How do I program the Auto-Arm Timer?
1) Press the [
ENTER] button
2) Enter your [
MASTER CODE]
[ENTER] button flashes
3) Enter [101] for Partition 1 or [102] for Partition 2 (see
Appendix A)
4) Enter the desired [
TIME]
Example: 6:15PM = 18:15
1686EU04.fm Page 25 Tuesday, August 13, 2002 10:01 AM
To Next Page
Loading...
Need help?
General
