28 User’s Guide
5.5 PGM BUTTON (PROGRAMMABLE OUTPUTS)
Your Spectra system may include one or more
programmable outputs (PGMs). When a specific event or
condition occurs in the system, the PGM can be used to
reset smoke detectors, activate light switches in your home
or office, open/close garage doors and much more. A PGM
can also be programmed to activate whenever the [
PG]
button is pressed and held for 3 seconds.
5.6 QUICK FUNCTION KEYS
Upon request of your installer or Security Company you
may have to perform one of the following. Press:
5.6.1 T
EST REPORT
[ENTER] + [MASTER CODE] + [MEM]
If your system is monitored by your Security Company, this
feature will send a test report code to the Security Company.
5.6.2 CALL PC
[ENTER] + [MASTER CODE] + [BYP]
Will initiate a call to the Security Company that is using the
upload/download diagnostic software.
5.6.3 Answer PC
[ENTER] + [MASTER CODE] + [FORCE]
Will force your security system to answer a call made by your
Security Company that is using the upload/download
diagnostic software.
1686EU04.fm Page 28 Tuesday, August 13, 2002 10:01 AM
To Next Page
Loading...
Need help?
General
